The Square Golf Launch Monitor package includes the following components:

• Launch Monitor: The main device that captures data.

• Battery: A replaceable lithium-ion battery that powers the device.

• Power Cable (USB A-to-C): For charging the battery.

• Club Marker: Attaches to the golf club for measuring swing path and attack angle.

• Remote Control: For easy operation of the launch monitor.

• Patterned Golf Balls (3 EA): Used to measure spin data accurately.

• Welcome Credit Card: Likely contains setup information and support contacts.

• Swing Stick & Safety Strap: Used for virtual shots when not hitting an actual golf ball.

Yes you can use any golf ball with Square Golf, Although if you use the dotted golf balls provided in the box, more precise ball data can be achieved.

Straight out of the box you can choose from 10 golf courses, each meticulously recreated with high-quality 3D graphics. Another 10 are currently being created and will be available soon.

There is no annual membership fee to use the range and practice areas.  Your Square comes with 1000 credits and it "costs" 1 credit to play a hole per person.  So the 1000 credits is like appriximately 55 rounds of golf.  When you need to top, credits will cost you the equivalent of 65 cents/round and you can guy them within the software - anytime.

** Also stay tuned for integration with E6Golf & GS Pro.

The LED lights on the Square Golf Launch Monitor provide various status indicators:

• Power LED (Red): Indicates the device is powered on.

• Status LED (Various colors):

  • Red (solid): Power on

  • Blinking Red: Low battery

  • White: Booting

  • Blinking Blue: Searching for the ball

  • Blinking Green: Ball ready (Virtual shot mode)

  • Green: Shot ready

  • Red: Processing target alignment

  • Blue: Processing simulation

• Bluetooth LED (Blue): Indicates the Bluetooth connection status, with various patterns showing searching, waiting for connection, and connected states.

Battery Care:

• Keep the battery separate from the launch monitor if not in use for a long time.

• Charging time is approximately 6 hours for a full charge with a 5V/2A power input.

• The battery lasts up to 8 hours on a full charge.

Technical Specifications:

• Battery: Replaceable lithium-ion, 3.6V / 6,000mAh

• Power Input: DC 5V / 1A

• Average Current: 600mA

• Network: Bluetooth v4.0 (Bluetooth Low Energy)

• Operating Temperature: 0°C to 40°C

Ball Placement:

Place the ball in the designated hitting zone (15cm x 15cm area) as specified.

The LED will blink blue while searching for the ball and turn green when the ball is ready.

Taking a Shot:

Ensure the ball is placed correctly in the hitting zone.

Once the LED turns green, you can perform the shot.

Minimum ball speed for shot detection is 3.4 mph for regular shots and 1.1 mph for putting.

The club marker should be attached to the golf club 20cm from the floor when the club is upright. This marker enables the monitor to measure:

Club path

Attack angle

Face angle (when using the virtual shot mode)

Even without the club marker, the monitor can measure speed, direction, and spin data of the golf ball.

Virtual Shot Setup:

Place the ball in the stick zone.

The LED will blink blue while searching for the ball and turn green when ready.

Point the swing stick at the ball, and after a 1-second pause, the LED will turn green indicating shot readiness.

Taking the Virtual Shot:

Perform the shot using the swing stick.

The monitor will process the data and simulate the shot based on the speed, path, and face angle of the swing stick.

The Square Golf Launch Monitor can measure the following shot data:

Speed: 3.4 to 201.3 mph (for shots) and 1.1 to 17.9 mph (for putting)

Direction: -15.0° to 15.0°

Elevation: -10.0° to 70.0°

Back Spin: -2,000 to 12,000 rpm

Side Spin: -7,000 to 7,000 rpm

Path Angle: -30.0° to 30.0°

Attack Angle: -30.0° to 20.0°

Using a patterned golf ball and club marker can enhance the accuracy of these measurements. For virtual shots, the data is estimated based on the swing stick’s speed, path, and face angle.

Ensure that your account is set to left-handed in the “My Account” section. When starting “Game Mode,” go to “Players” and verify that all left-handed players are properly configured under the “Handed” section.

1. PURCHASE A GSPRO LICENSE
   Visit GSPro to purchase an Open API licence - https://gsprogolf.com/ , then download and install the software. If you already have a SPro licence, visit GSPro Licence Conversion to convert it to Open API.
   Minimum PC Specifications: Windows 10, 8 GB RAM (16 GB recommended), Intel i5 processor (i7 recommended), Nvidia GTX 1060 graphics (RTX 2070 or better recommended), and 500 GB free hard drive space for course downloads.

2. DOWNLOAD & INSTALL CONNECTOR
   Download and install the Square Golf GSPro Connector to your PC. Download here: https://exgolf.s3.us-west-1.amazonaws.com/GSPro/SQG-GSPRO-Connect-Installer-v0.9.9-beta.exe

3. LAUNCH GSPRO
   Launch the GSPro software on your PC and when asked selected the "Open API" licence type.

4. POWER UP YOUR SQUARE GOLF
   Power on your Square Golf device and ensure it is in Bluetooth pairing mode (flashing blue light), ready to search for connections.

5. OPEN SQUARE GOLF GSPRO CONNECTOR ON YOUR PC
   Use Windows Key + Tab to switch to your desktop and open the Square Golf GSPro Connector. In the Connector, click "Scan" to locate your Square Golf device, select it from the dropdown, and click "Connect" (the connection indicator should turn green). Next, in the Connector, click "Connect" under the GSPro section (which should also turn green).

6. VERIFY CONNECTION IN GSPRO
   Return to the GSSPro software and confirm that the bar in the bottom right corner is green, indicating a successful connection.

7. YOU'RE READY TO PLAY!
   Your setup is complete, and you're ready to play GSPro with Square Golf. Enjoy your game!